Exfo AXS-100 Series OTDR Manuel d'utilisateur télécharger pdf (Page 49)

Testing Fibers

OTDR 41

Testing in Auto Mode

8. Specify whether the unit must keep the fiber settings for all acquisitions

or not, as follows:

8a. Use the arrows to select the Keep parameters list, and then press

Enter to open it.

8b. If you want the unit to reset the settings for each acquisition,

select No.

If you want the unit to always use the same parameters, select

Yes.

8c. Press Enter to confirm.

Note: Even if you configured the unit to keep the parameters, it is possible to reset

the fiber settings by selecting No, and then starting an acquisition. If

desired, you can set back the option to Yes to use the new settings for the

next acquisitions.

9. Press F

ASTRACE to start the acquisition.

You can stop the acquisition at any time by pressing F

ASTRACE once

again.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 154 155

Pas de commentaire

Exfo AXS-100 Series OTDR Manuel d'utilisateur Page 49