Exfo AXS-100 Series OTDR Manuel d'utilisateur télécharger pdf (Page 53)

Testing Fibers

OTDR 45

Testing in Manual (Advanced) Mode

4. Use the left/right function arrows until you see Parameters, and then

display the pane (F1/F2 key).

5. Select the test mode as follows:

5a. Use the arrows to select the OTDR

mode list, and then press Enter

to open it.

5b. Use the up/down arrows to select

Manual, and then press Enter to

confirm.

6. Select test wavelengths as follows:

6a. If your OTDR supports singlemode, singlemode live, or multimode

wavelengths, under Wavelength, from the list, select the desired

fiber type (for live-fiber testing, select SM Live; for C fiber, select

50 μm and for D fiber, select 62.5 μm).

6b. Use the arrows to select the desired wavelengths. Press Enter to

confirm each selection.

7. Select range as follows:

7a. Use the arrows to select the Range list, and then press Enter to

open the list.

7b. Use the up/down arrows to select the desired distance range, and

then press Enter to confirm.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 154 155

Pas de commentaire

Exfo AXS-100 Series OTDR Manuel d'utilisateur Page 53