Exfo MaxTester DSL Manuel d'utilisateur télécharger pdf (Page 26)

Configuring the MaxTester DSL Test Set 20

³ DHCP Server enables the dynamic host configuration protocol (DHCP) mode

for the LAN side of the connection.

³ Platform Ip Address displays the IP address of the unit’s platform when the

DHCP Server is disabled.

To configure LAN setup values:

1. Press the up/down arrows to select the desired parameter.

2. Press the left/right arrow keys to view and select the options.

3. If you make any changes to the parameter values, press the on-screen function

keys to save or cancel your input.

Select Tests

The Select Tests page allows you to Enable/Disable the

following optional sub-tests, within the 3 types of test

applications.

³ IPTV Test - when enabled, all other sub-tests are

automatically disabled.

³ Ping is also known as ICMP echo request and

determines network connectivity and accessibility.

³ FTP test verifies the file transfer speed of the file

download and upload.

³ Traceroute is a complement tool of the Ping test to

determine why a destination cannot be reached, or

where the internet is broken.

³ Web Browser Test can only be started when a WAN

connection (either through xDSL or Ethernet) has

been established.

When enabled, the sub-tests’ test pages are available in the results pages.

When highlighted, the sub-tests’ setup contents are shown on the Test Setup tab.

Note: Select Tests and Test Se tu p tabs are not

available in Sync Only and

Bridged Access Modes.

To select sub-tests:

1. Press the up/down arrows to highlight the desired test.

2. Press the left/right arrow keys to toggle between Enable/Disable.

3. Press on any value to open the list box to toggle between Enable/Disable.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 57 58

Pas de commentaire

Exfo MaxTester DSL Manuel d'utilisateur Page 26