Exfo iOLM Manuel d'utilisateur télécharger pdf (Page 84)

Managing Test Configurations

78 iOLM

Modifying a Test Configuration

5. Select the OPM P/F Thresholds tab.

6. Under OPM P/F Thresholds, modify the following parameters, as

needed.

 Wavelength: Select the wavelength for which the different

Pass/Fail threshold values can be specified. The available choices

of the wavelength depends on the iOLM module and the Power

Meter settings in the Preferences tab.

Note: The Any wavelength option will be displayed only if more than one

wavelength is present. If Any wavelength is selected, the threshold values

will be applied to all the wavelengths present in the drop-down box.

 Power: Select the power threshold type from the available choices

and then modify the power as required.

7. Tap OK to save the changes and close the window, or tap Cancel to

exit without saving.

Tap Revert to Factory Settings to remove all the changes and apply the

default values associated with the selected configuration.

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 185 186

Pas de commentaire

Exfo iOLM Manuel d'utilisateur Page 84